Normally Gemballa produce tuning programs for Porsche. But today, Gemballa presents its first tuning program for Ferrari, and not for any Ferrari, but for the Enzo Ferrari.
The front spoiler lip generates an additional downthrust of up to 35 kilograms at the front axle, according to the individual position. Analogically, the flap on the newly designed rear spoiler generates even up to 85 kilograms more downthrust on the rear wheels. For optimal handling results, the flap lowers, as soon as the car reaches a speed of 120 km/h. In this way, the GEMBALLA-aerodynamics concept adjusts to the outer conditions and always ensures perfect road holding characteristics.
Following the design of Formula-1 racing cars, the GEMBALLA MIG-U1 has an extended front and an edged rear spoiler. Formerly rounded edges were replaced in order to provide the car with an aggressive look with greedy air inlets and outlets.
The MIG-U1 grows broader by 80 millimetres at the front- and 100 millimetres at the back axle.
For everyday use, the optional electro-hydraulic height-adjustment lift the body by 45 millimetres at the front- and rear axle and therefore allows driving over obstacles such as underground car park entrances and traffic ramps. Also by pushing a button or by reaching 80 km/h, the MIG-U1 lowers itself to its original level.
At the front, the 10×19 inch rims hold high-performance wheels in the dimension 265/35, while the back axle transfers the power of the engine through 13×20 inch rims with 335/30 wheels.
The twelve cylinder engine of the GEMBALLA MIG-U1 works with an optimised motor management and an especially adjusted exhaust system. This combination allows a performance output of 700 hp (515 kW). The four-pipe system with pneumatic flap control is added to the sports catalyser. The end-pipes are equipped with the typical GEMBALLA heat shield and share the exit into the rear skirt with the exhaust ducts of the rear wheel houses.
Only 25 cars will be made.